Nikon 1960 - Zoom-Nikkor Wide-angle Zoom Lens, Инструкция по эксплуатации

Страница: 16 / 60

16
Ch
Jp
En
De
Fr
Es
It
Ck
Attaching Bayonet Hood HB-23
Align the index ( ) on the hood with the lens hood mounting index on the lens,
and turn the hood counterclockwise (as viewed from the camera) until it click stops at
the index ( ).
To facilitate attachment or removal of the hood, hold it by its base rather than its
outer edge. To store the lens hood, you can attach it in the reverse position.
Lens Care
•Clean the lens surface with a blower brush. To remove dirt and smudges, use a
soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from center to outer edge, taking care not to
leave traces or touch other parts.
•Never use thinner or benzene to clean the lens as this might damage the lens, result
in a fire, or cause health problems.
•To protect the front lens element, an NC filter is recommended at all times. A lens
hood also helps protect the front of the lens.
•When storing the lens in the lens case, attach both front and rear caps.
•When the lens will not be used for a long time, store it in a cool, dry place to
prevent mold. Also store the lens away from direct sunlight or chemicals such as
camphor or naphthalene.
•Do not get water on the lens or drop it in water as this will cause it to rust and
malfunction.
•Reinforced plastic is used for some parts of the lens. To avoid damage, never leave
the lens in an excessively hot place.
Supplied Accessories
77mm snap-on front lens cap
Rear lens cap LF-1
Bayonet hood HB-23
Hard Case CL-76
Optional Accessories
77mm screw-in filters, including circular polarizing filter*
Teleconverter TC-14A
Teleconverter TC-201
* With a circular polarizing filter, vignetting occurs at 17mm. Lens hoods HN-29 and
HN-34 can be used only at a focal length of 35mm.