background image

Please read these instructions before using your work light.  Be sure to charge the 

work light before the fi rst use. 

 

—

CAUTION:  Do  not  use  this  work  light  in  explosive  atmospheres,  near  fl ammable 

liquids, or where explosion-proof lamps are required. Do not immerse in water. 

 

—

CAUTION: For light duty work only.

CHARGING  

Initial Use

Fully  charge  the  work  light  before  the  fi rst  use.  If  the  battery  is  new  or  has  been 

unused  for  several  months,  several  charge  and  discharge  cycles  may  be  needed  to 
reach full battery capacity. To reach maximum performance, run the light to completely 
discharge the battery and then recharge. Each charge cycle will extend the operation 
time  until  maximum  capacity  is  achieved.  The  charge  time  for  maximum  capacity  is 
approximately 4 hours.

Regular Use

 

—

Use only the supplied AC or DC charging adapter.

 

—

For best performance, charge the work light when the LED’s start to dim. 

 

—

Connect the AC power adapter to the light. The red indicator will light.

 

—

The red light indicates the work light is being charged. The red light remains on until 

the battery is fully charged. At full charge, the light turns off. The total time to full charge 
varies depending on the remaining charge in the battery pack.

 

—

Keep the work light plugged into the charger to maintain a trickle charge.

TIPS TO EXTEND BATTERY LIFE

 

—

The work light NiMH internal battery pack does not have a memory effect. Charging 

the work light often helps extend its useful life. 

 

—

A new work light or one that has not been used for a long period of time may not 

accept  a  full  charge  initially.  This  is  normal  and  does  not  indicate  a  problem.  Fully 
discharge and then charge the unit several times to condition the battery pack for full 
capacity. As the battery pack capacity increases the charge time shortens.

 

—

Charge the unit after each use, whether the work light is fully discharged or not.

 

—

Store the work light at room temperature

OPERATION

The work light has two buttons located on the back of the handle.  The top button 

turns the Spotlight on or off.  The bottom button turns the Floodlight on or off.  Pressing 
both buttons will put the user into Dual-Light Mode.

Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.com

INS-NSR2492B-14

Instruction Manual

NSR-2492B

THANK YOU FOR PURCHASING THE NSR-2492B RECHARGEABLE WORK 

LIGHT. SAVE THESE INSTRUCTIONS. 

WARRANTY

1 Year Limited Warranty

This product is warranted to the original purchaser for 1 year and only covers failures 

due to defects in materials or workmanship. If this product is used for rental purposes, 
the warranty term is reduced to 90 days from the date of purchase.

Not Covered

Consequential  damages,  incidental  damages  or  incidental  expenses,  including 

damage to property. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you. This 
warranty gives you specifi c legal rights, which may vary from state to state. 

Warranty Claims - USA

Contact Bayco Products, Inc. for USA warranty claims. Call 800-233-2155 or email 

[email protected]  and  Bayco  Customer  Service  will  provide  a  Return  Goods 
Authorization  (RGA)  to  facilitate  rapid  warranty  action. After  receiving  the  RGA,  send 
the product (shipping prepaid) to BAYCO PRODUCTS, INC. • 640 S. SANDEN BLVD • 
WYLIE, TEXAS • 75098. Include a dated proof of purchase and a brief description of the 
defect with your name, address and phone number. Your product will either be repaired 
or replaced at the option of Bayco and returned as soon as practical, but no later than 45 
days after being received by Bayco.

Warranty questions and international claims

If you live outside the USA or have questions about this warranty or an inquiry about 

other  Bayco  products,  contact  BAYCO  PRODUCTS,  INC.  •  640  S.  SANDEN  BLVD  • 
WYLIE, TEXAS • 75098 or call 800-233-2155 (or 469-326-9400).

 Mode d’emploi

NSR-2492B

MERCI D’AVOIR ACHETÉ LA BALADEUSE NSR-2492B RECHARGEABLE. 

VEUILLEZ CONSERVER CES INSTRUCTIONS.

Veuillez lire ces instructions avant d’utiliser ce produit. Veillez à charger la baladeuse 

avant de l’utiliser pour la première fois.

 

—

AVERTISSEMENT  :  Ne  pas  utiliser  ce  produit  dans  une  atmosphère  explosive, 

à  proximité  de  liquides  infl ammables,  ou  dans  des  endroits  exigeant  un  éclairage 
antidéfl agrant. Ne pas immerger dans l’eau.

 

—

AVERTISSEMENT : uniquement pour les travaux légers.

CHARGE

Utilisation initiale

Chargez la baladeuse à bloc avant la première utilisation. Si la batterie est neuve 

ou n’a pas été utilisée depuis plusieurs mois, il est possible qu’il faille plusieurs cycle de 
charge et décharge pour que la batterie atteigne sa capacité maximale. Pour obtenir les 
meilleurs résultats possibles, utilisez la baladeuse de façon à complètement décharger 
la batterie puis rechargez-la. Chaque cycle de recharge prolongera la durée d’utilisation 
jusqu’à ce que la capacité maximale soit atteinte. La durée maximale de charge requise 
est d’environ 4 heures.

Utilisation normale

 

—

Utilisez exclusivement l’adapteur de chargeur c.a ou c.c fourni.

 

—

Pour de meilleurs résultats, chargez la baladeuse quand les LEDs commencent à 

s’affaiblir.

 

—

Connectez l’adapteur de courant c.a. à la baladeuse. Le voyant rouge s’allumera.

 

—

Le voyant rouge indique que la baladeuse est en train de charger. Le voyant reste 

rouge jusqu’à ce que la batterie soit complètement chargée. Une fois complètement 
chargée, le voyant s’éteint. La durée totale de charge varie en fonction de la charge 
qui reste dans la batterie.

 

—

Conservez  la  baladeuse  branchée  dans  le  chargeur  pour  obtenir  une  charge 

d’entretien.

CONSEILS POUR PROLONGER LA VIE DE LA BATTERIE

 

—

La batterie interne NiMH n’a pas d’effet de mémoire de recharge. Recharger souvent 

la batterie contribue à prolonger sa durée de vie.

 

—

Une  nouvelle  baladeuse,  ou  une  baladeuse  qui  n’a  pas  été  utilisée  pendant 

longtemps,  n’accepte  pas  initialement  de  charge  complète.  Cela  est  normal  et 
n’indique  pas  de  problème.  Déchargez  complètement  puis  chargez  la  baladeuse 
plusieurs fois pour permettre à la batterie d’atteindre sa capacité maximale. Le temps 
de charge devient plus bref au fur et à mesure que la capacité de la batterie augmente.

 

—

Chargez  la  batterie  après  chaque  utilisation,  que  la  baladeuse  soit  complètement 

déchargée ou non.

 

—

Stockez la baladeuse à température ambiante.

Отзывы: