Mode operation - Product information - Warning
Operation
-
Press the ON/OFF switch to turn on the Lite Tower on full power
-
Press again for the low power setting
-
Press a third time to activate the RED FLASHING light
-
Press a fourth time to turn off the light
-
Press and hold the switch for 3 seconds to activate the RED light SOS mode.
Battery Installation & replacement
-
Remove powerpack cap. Remove the old batteries and insert new batteries according to the polarities labels. Replace
powerpack cap.
-
Remove batteries if you are not using the light for a long period or before storage
-
Only use AA alkaline batteries
-
NOTE
: In order to protect the unit – please ensure that the battery’s polarity matches the polarity label. Reverse polarity
may damage the circuit.
Warning
-
Do not flash the light beam directly to people’s eyes
General Warning
-
Do not mix new batteries with used batteries or mix batteries from different battery manufacturer or from different type
-
Remove the batteries when unused for a period of time to prevent battery leakage in the device
Utilisation - Information produit - Avertissement
Mode de fonctionnement
-
Appuyer sur l’interrupteur ON/OFF pour allumer votre Lite Tower à pleine puissance (illumination 360°)
-
Appuyer une seconde fois pour l’intensité lumineuse faible (illumination 360°)
-
Appuyer une troisième fois pour activer le ROUGE CLIGNOTANT (illumination 360°)
-
Appuyer une quatrième fois pour éteindre votre lampe.
-
Appuyer et maintenir l’interrupteur pendant 3 secondes pour activer le mode SOS lumière rouge.
Installation des batteries
-
Retirez le couvercle du powerpack. Retirer les anciennes piles et insérer de nouvelles piles selon les étiquettes de polarité. Remettre
le couvercle du powerpack.
-
Retirez les piles si le produit n’est pas utilisé pour une longue période ou stocké.
-
Utilisez uniquement des piles alcalines AA.
NOTE
: Afin de protéger l'unité - assurez-vous que la polarité de la batterie correspond à l'étiquette de polarité. L’inversion de polarité
peut endommager le circuit.
Maintenance
-
Ne regardez pas directement la LED. Cela peut endommager la vue.
-
NE PAS exposer la batterie au feu / températures élevées ou à des conditions de froid / humide extrêmes.
GUARANTEE TERMS
NightSearcher products have been carefully tested and inspected before shipment and are guaranteed to be free from defective
materials and workmanship for a period of 12 months (battery not covered) from the date of purchase, provided that the enclosed
instructions have been followed. Should you experience problems with your NightSearcher product, please return the item, complete
with any chargers, to your place of purchase or contact NightSearcher Ltd direct. Your NightSearcher guarantee does not apply to
consumables (LEDs and battery), normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling,
alterations, accidents or repairs attempted or made by any personnel without prior approval from NightSearcher Ltd. Your
NightSearcher guarantee is not effective unless you can provide a dated proof of purchase. Please note that this guarantee does not
affect your statutory rights. If at any time, you need to dispose of this product or parts of this product: Please note that waste
electrical products, batteries and bulbs should not be disposed of with household waste. Please recycle where facilities exist, check
with your local authority for recycling advice.
NIGHTSEARCHER LIMITED - Unit 4 Applied House - Fitzherbert Spur – Farlington – Portsmouth – PO6 1TT – UNITED-KINGDOM
Visit our website on www.nightsearcher.com
Light Source
4 dual color ultrabright LED
Light Output (lumens)
55
24
Red flash
Running Time
3h
10h30
24h
Battery
2 x AA Alkaline
Product Dimensions
(Dia) 43 x (L) 112.3 mm
Product Weight
82 g (excluding batteries)
NS Part No
NSLITETOWER-X2
Supplied with
2 x AA alkaline batteries
LITE-TOWER-X2 - User Manual
ON / OFF switch
