nifty HYBRID DC HR15N Series, Руководство по обслуживанию

Страница: 9 / 79

3
English 07/16
Service Manual
HR15/17N HYBRID DC
Nifty Pty Ltd, 11 Kennington Dr, Tomago NSW 2322, Australia
Tel: +61 (0) 2 4964 9765 Fax: +61 (0) 2 4964 9714
1.4 General Maintenance Information
Any repair or maintenance work on a Niftylift must be undertaken by a competent person with sufficient
training and experience to perform the activity. Basic mechanical, hydraulic, and electrical skills are
required to perform routine maintenance and minor repairs to a Niftylift. However, several procedures
require specialised skills, tools, lifting equipment and a suitable workshop. In these instances, it is
recommended that maintenance and repair be performed by Niftylift or at a Niftylift approved service
centre.
Manufacturer's safety rules and instructions must be obeyed at all times.
Refer to “Frequent Inspection” on page 4 where the Niftylift has been out of service for a period longer than
3 months.
FAILURE TO PERFORM PREVENTATIVE MAINTENANCE AT THE REQUIRED
INTERVALS MAY RESULT IN A NIFTYLIFT THAT IS NOT SAFE TO USE WHICH
COULD CAUSE INJURY OR POSSIBLE DEATH.
Regular inspections and appropriate maintenance will ensure the Niftylift performs efficiently and
economically with minimal service or repair down time.
1.4.1 Pre-Maintenance Checks
Perform the following before maintaining the Niftylift:
•
Park the Niftylift on firm and level ground,
• Turn off ignition, remove the key, and relieve hydraulic system pressure,
• Ensure the Niftylift is in transport mode, i.e. all booms lowered and slewed parallel to the base, and
cage floor horizontal,
• Ensure wheels are chocked, and, if installed, engage the parking brake,
• Allow the Niftylift to cool down,
• Disconnect power to the Niftylift,
• Disconnect batteries before replacing electrical components.
1.4.2 Maintenance Information
Ensure maintenance is carried out in suitable workshop facilities with appropriate tools and suitable lifting
equipment.
Components must be replaced with identical or equivalent parts. If unsure contact your nearest Niftylift
approved dealer for advice.
Inspect all parts prior to reassembly and replace if necessary. Do not install faulty, used, or worn parts to
a Niftylift.