nifty HYBRID DC HR15N Series, Руководство по обслуживанию, Страница: 28 / 79

Service Manual
HR15/17N HYBRID DC
English 07/16
22
3.1.10 In-line Fuel Filter Replace
FUEL ESCAPE - PLACE A SUITABLE CONTAINER UNDERNEATH THE WORK
AREA AND DISPOSE FUEL ACCORDING TO LOCAL REGULATIONS.
1) Locate fuel filter and clamp the feed pipe from
tank.
2) Loosen jubilee clips and remove fuel pipes.
3) Replace fuel filter ensuring the arrow on the filter
points in the direction of fuel flow (tank to engine).
4) Tighten Jubilee clips.
5) Remove clamp from feed hose ensuring filter
refills with fuel.
6) Inspect for leaks.
7) See section 3.1.12 for bleeding air from the fuel system before attempting to start the engine.
3.1.11 Fuel Filter and Water Separator Clean/Replace
FUEL ESCAPE - PLACE A SUITABLE CONTAINER UNDERNEATH THE WORK
AREA AND DISPOSE FUEL ACCORDING TO LOCAL REGULATIONS.
1) Close the fuel filter tap (1).
2) Undo the top ring and remove container and fuel
filter (3).
3) Rinse out container with clean diesel fuel.
4) Wash fuel filter with clean diesel or replace if
necessary.
5) Observe clean assembly practices to avoid
contamination by dust or dirt.
6) Reinstall the container and tighten the top ring by
hand.
7) See section 3.1.12 for bleeding of air from the
fuel system before attempting to start the engine.
To Fu
el Pu
mp
From
Fuel Ta
nk
Flow Indicator
Place Clamp Here
OFF/CLOSED
3
1
2