Height Rider/SP Series
Operating & Safety Instructions
English/USA – 03/10
Original instructions
29
4.3.3
WARNING ICONS
Advisory
High Speed Drive Available :
Machine can be driven at its maximum speed if
ground and evironmental conditions are suitable and it is safe to proceed.
High Water Temperature :
Check engine coolant level.
Caution
, the cooling
system is pressurised, so allow engine to cool sufficiently before removing
filler cap.
Low Oil pressure :
If illuminated during machine operation,
check engine oil
level. Top up if necessary.
Safety Critical
Safe Working Load exceeded:-
The Maximum SWL (225kg/500lbs) has
been exceeded. Immediately remove any unnecessary items from the platform
in a safe manner to restore machine functions.
Alternatively, the platform may have come into contact with a fixed object, see
Section 5.3 for recovery procedure.
MAX tilt angle exceeded:-
Lower booms into stowed position and drive onto
level ground to fully restore machine operation.
Note: If a
Safety Critical
condition (red flashing triangle) has been detected, the safety warning lamp
(see
Section
4.3.1, Item 10) on the Platform Control Panel will also illuminate.
