Height Rider/SP Series
Operating & Safety Instructions
English/USA – 03/10
Original instructions
23
Note; During normal machine usage with the engine running, the batteries are on continuous recharge
The exception to this is when the control system decides that additional electric power is required in
order to maintain drive/function speed. If the operator is using electric power only and a low battery
warning has activated, it is advisable to start the engine, enabling continued use of the machine, whilst
at the same time recharging the batteries.
BATTERY ISOLATOR
: - The battery-disconnect handle is located adjacent to the links cylinder,
between both engine and control canopies. In order to isolate the machine control and power circuits
from the batteries it is necessary to pull the release handle, which disconnects the supply to the entire
control system. Under normal operation, the machine key switch should be used to isolate the
machine, with the battery isolator handle only being required for emergencies, in the event of a short
circuit, or during routine maintenance.
4.1.5
DUTY SELECTOR
: -
On multiple power option machines, the machine will default to electric power
unless the diesel engine has been started.
4.1.6
FUSES & TRIP SWITCHES: -
Power Tray
Chassis
35A
Circuit breaker inside ABS box
325A
Fuse inside base
2 x 10A
Circuit breaker inside ABS box
2A
Circuit breaker inside box
Ground Control Station
Platform Control Station
125A
Fuse on battery terminal
2 x 15A
blade fuses behind Control Panel
4 x
15A
blade fuses inside Ground Control Box
2 x 2A
blade fuses behind Control Panel
1 x
2A
blade fuse inside Ground Control Box
1 x 15A
Circuit breaker
1 x 80A
Fuse
