background image

2. 

In the event of leakage of gas from the system, 

it is necessary to: - close 

the cylinder valve, - extinguish all sources of open fire, - do not use devices that 
may cause sparks (electric sockets, power switches, radios, TV sets, etc.), - open 
the  doors  and  windows  and  ventilate  the  room  thoroughly  (liquid  gas,  being 
heavier than air, accumulates in the lower parts of the room). In justified cases, 
notify your vendor - the gas supplier.

 

3.  In  the  event  of  a  fire  in  the  room  or  cylinder

,  if  possible, turn  off  the 

valve and remove it from the room into the open air. If this is not possible, cool the 
cylinder  as  much  as  possible  using  a  stream  of  water  or  heavy  wet  rags.  The 
presence of gas cylinders in the room on fire should be reported to the supervisor 
of the firefighting brigade.

 

 

NOTE!: 

1.  It is forbidden to check the system for leaks using a flame. 
2.  It is not allowed to cover air vents. 
3.  It  is  necessary  to  regularly  check  the  condition  of  gas  hoses  and, 

when the need arises but always before the expiration date indicated 
on the hoses, replace them with new ones, exclusively approved for 
use in gas systems. 

4.  One approved dry powder or ISO 7165 compliant fire extinguisher, 

with a capacity of at least 1 kg, and a fire blanket should be located 
near  kitchen  appliances,  in  the  vicinity  of  the  front  door.  It  is 
necessary  to  familiarise  yourself  with  the  fire  extinguisher  manual 
and  the  local  fire  protection  regulations.  Fire  extinguisher  and 
blanket not included 

5.  Never  allow  unqualified  persons  to  modify  LPG  systems  or 

equipment. 

 

NOTE ! 

 

Improper handling can result in significant amounts of gas 

escaping or poor combustion, which can cause a fire or poisoning. 
Carbon monoxide exhaust poisoning manifests as tinnitus, 
heaviness, increased heart rate, dizziness, vomiting and general 
weakness. The person affected should be given first aid and an 
ambulance should be called. When giving first aid, you should: 

 
 
 
 
 
 
 
 

-17- 

- take the person affected out into fresh air 

- facilitate breathing by unzipping their clothing, 
- administer sobering agents for inhalation (e.g. ammonia), 
- cover the patient with a blanket and do not let them fall asleep 
-  call for medical help and constantly supervise the patient until 

medical help arrives 

 

6.5.4. PLUMBING SYSTEM 

 

The plumbing system includes: 

- water supply lines 
- water tank, capacity 30 l 
- water drain line 
- electric valve tap 
- electric pump 

 

The water tank is located in the left front sofa. 
Place the pump in the water tank. Water flows out of the tap when the valve is 

turned (the pump is turned on automatically). 

The water used is discharged through a system of water lines under the 

caravan. 

It is recommended to park the caravan in a caravan site over a drainage grate 

so that the water flowing out does not spill over the sides. 

 

6.5.5. TRAVEL TOILET 

 

The caravan is equipped with a travel toilet. The toilet is fitted with a tank, 

accessed from the outside of the caravan through a special door. 

 

For a detailed description of the use and operation of the travel toilet, 

please refer to the manual supplied with the caravan. 

 

7. BODYWORK MAINTENANCE 

 

Caravan body and windows 

Bodywork maintenance consists in keeping it clean. The laminate can be 

secured  against  dirt  absorption  using  wax  preparations  designed  for  car 
bodyworks  and  wet  cleaned,  preferably  with  special  washing  agents.  Windows 
should be washed using a soft cloth, thoroughly rinsed with water and protected 
against scratches. 

 
 
 
 
 

 

-18- 

 

Содержание Caravan N-Cross












Отзывы: