manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 272

254

MAINTENANCE

Cleaning Measuring Windows

6.6

Cleaning Measuring Windows

Fingerprints, oil from eyelashes, or dusts on the measuring windows affect the measurement 
accuracy.
Be sure to check the windows before each refraction. When the windows are dirty, remove any 
dust on the measuring window with a blower brush. For more persistent stains, lightly wipe with a 
clean and soft cloth.

Be sure to wipe lightly so as not to scratch the glass of the measuring window.

If condensation forms inside the measuring win-
dows, remove the protective glasses and wipe 
the inside.

Screws

Protective glass

The protective glasses of the operator and 
patient sides are removed by unscrewing 
the four screws with a precise screwdriver.

Remove the face shields before removing 
the patient’s side protective glasses.

• Attach the protective glasses with the screws just after cleaning.

Failure to do so could allow dusts to be settled inside the RT-5100. It may affect the viewability or 
cause malfunction.

6.7

Cleaning Exterior

When the cover or panel becomes dirty, clean it with a soft cloth.
For stubborn stains, soak the cloth in a neutral detergent, wring well, and wipe. Finally dry with a 
soft, dry cloth.

• Never use an organic solvent such as paint thinner.

It may ruin the surface of the refractor.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды