Nidek Medical RT-5100 Скачать руководство пользователя страница 138

Страница: 138 / 306

120

ADVANCED FEATURES

Link Off Function

3.13 Link Off Function

This function prevents auxiliary lenses or mode (S/C/A) from being switched automatically when a
chart is changed.

Press the left side switch of the control box.

The Chart Controls window appears.

Press [Link off].

The link off function makes the following
possible even when any chart button is
pressed.

• The auxiliary lenses are not placed

automatically.

• The mode (S/C/A) is not switched.
• The visual acuity is not entered automatically

when any mask key is pressed.

Pressing

switches the chart.

• The link off function is not canceled even when

is pressed or power is turned off and

on.

• The linkage functions only for

and

even when the link off function is activated.

Pressing [Link off] on the Chart Controls window again cancels the function.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды