manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 120

102

ADVANCED FEATURES

Presenting Near Chart

3.4

Presenting Near Chart

Near chart can be presented on the display.

1 

Call up the main menu screen.

Press 

.

2

Display the Near Chart screen.

Function buttons

Press [Vision Test].

3

Select the desired chart to be displayed 
with the function button.

[

ٕ

Next]

̖̖

Changes the function but-   

tons.

[

]

̖̖

Returns  to  the  main  menu    

screen.

Pressing 

 displays the explanation of presented near chart. Pressing 

 again or 

[

] returns to the Near Chart screen.

Help is not available for the newspaper and music score buttons.

• The Near Chart screen is just a guide. To measure accurately, use the accessory near point 

rod and near point chart.

• Just after turning on the power, [Vision Test] in the Main Menu may not be functional as the 

images are being loaded in the background.

The function can be used after the images are loaded.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды