B R U S H L E S S D C M O T O R A N D G R E E N D R I V E
T M
M A N U A L
14
Nidec Motor Company
Connecting inputs and outputs
Motor Power Supply Connections
Never connect or disconnect the power supply to a motor or control while the power is
turned on. Minor or moderate injury could result if not avoided.
All wire gauge sizes must be in accordance with all federal, state, and local
codes.
FIGURE 2 – POWER SUPPLY CONNECTIONS (C1)
Connect the power supply to the GreenDrive
TM
using a 2-pin connector (Molex P/N 39-01-2020
or equivalent) and terminals (Molex P/N 39-00-0039 or equivalent).
1.
Connect the positive lead from the external power supply to pin 1 on the motor’s power
supply connector labeled as C1 .
2.
Connect the negative lead from the external power supply to pin 2 on the motor’s power
supply connector labeled as C1 .
Power Supply Connector (C1)
Pin 1
