Nicolaudie Wolfmix W1, Справочное руководство

Страница: 27 / 53

Position Picker
Displayed data:
●
The name of the currently selected position button.
●
An XY grid used to select a position.
●
The generated position values.
●
The FAN and FOCUS values.
Encoder actions:
●
Move the first encoder to control the PAN value. Shift + move for fine control.
●
Move the second encoder to control the TILT value. Shift + move for fine
control.
●
Move the third encoder to set the FAN. When the FAN is at 50%, all fixtures will
point in the same direction (provided the fixtures have been correctly set in the
Fixture Limits screen).
●
Move the fourth encoder to set a FOCUS value.
Other actions:
●
Tapping and dragging on the XY grid will set the PAN and TILT values to the
selected position.
●
Tapping the first button to the top right will open a keyboard allowing for the
name of the position to be changed.
●
Tapping the second button to the top right will set the position to the center.
●
Tapping the flashing Matrix button stores the new position and closes the
position picker. Tapping any other button cancels the change.
27