Beam Fx sequencer
The Beam Fx sequencer allows for eight different beam selections to be chosen. When
a beam selection is made, the selected beams will be opened. Each beam selection
will be played sequentially according to the FX speed.
Displayed data:
●
Eight step buttons with the currently selected step highlighted and shown to
the bottom left.
Encoder actions:
●
Move the first encoder to cycle through the eight steps. The sequencer is
automatically paused when cycling through steps.
Toolbar actions:
●
Play and pause the sequencer.
●
Go back to the Beam Fx screen.
Other actions:
●
Tapping one of the eight step buttons will navigate to the corresponding step
and pause the sequencer.
●
Hitting the top row of buttons adds the Beam Effect to the corresponding
group.
●
Hitting the beam selection buttons in the matrix will turn the beams on and off
for the selected step. Each column represents a group and rows 25 represent
4 different sections within the group.
●
23
