Fixture builder
The fixture builder is used to create fixture profiles. A fixture profile is a list of channels
and features associated with a particular fixture.
Fixture channels screen
Displayed data:
●
A grid showing the fixtures channel types.
●
The fixtures starting address used for testing, number of beams, fixture name
and total number of channels.
Encoder actions:
●
Move the first encoder to set a test address for the fixture. This allows for a
connected fixture to be tested in real-time whilst it’s being built.
●
Move the second encoder to adjust the number of independently controllable
beams a fixture has. For example, an LED bar may have 4 independently
controllable RGB beams. Each Wolfmix fixture profile may have up to 64 beams.
●
If the fixture has more than 20 channels, the fourth encoder can be used to
navigate between each page of 20 channels. Each Wolfmix profile may have up
to 255 channels.
Toolbar actions:
●
Rename fixture.
●
Tapping DONE will exit the fixture builder. If a change has been made, a save
prompt will be displayed.
Other actions:
●
Tapping on a grid button or one of the matrix buttons will navigate to the editor
of the corresponding channel. If the channel is empty, a channel type picker will
be displayed first.
15
