Nice S4BAR страница 19 Скачать руководство пользователя

Страница: 19 / 160

English –

Operation manual

(to be given to the final user of S4BAR)

– Transit is only permitted if the pole is completely open and

stationary!

Warnings

1 - Children

An automation system guarantees a high level of safe-

ty, using its detection systems to prevent movement in the presence

of persons or objects, and ensuring constantly foreseeable and safe

activation . Nonetheless, it is advisable to ensure that children do not

play in the vicinity of the automation . To prevent the risk of acciden-

tal activation, do not leave the remote controls within the reach of

children . this is not a toy!

2 -

This product is not designed to be used by persons (including

children) whose physical, sensorial or mental capacities are reduced,

or with lack of experience or skill, unless suitable instructions regar-

ding use of the product have been provided by a person responsible

for safety or under supervision of the latter .

3 - Malfunctions

if the automation is seen to perform abnormally,

disconnect the electrical power supply from the system and manual-
ly release the gearmotor .

Never attempt to perform repairs; contact

your local installer for assistance . In the meantime the system can

be used as a manual access point, after releasing the gearmotor as

described be low in this document .

In the event of breakage or a

power failure, while waiting for the installer or the electrical

power supply to return, if the buffer battery is not fitted, the

automation can still be used.

Manually release the gearmotor (see

step 9 - Gearmotor manual releasing and locking) and move the pole

manually as required .

4 - Safety devices disabled

: the barrier can be operated even

when the safety device on the barrier do not work correctly .

- Activate the barrier command (with the transmitter or key-opera-

ted selector switch, etc .); if all is in working order, the pole opens

or closes normally; otherwise the flashing light emits a number of

flashes and the manoeuvre is not started (the number of flashes

depends on the reason for which the manoeuvre does not start) .

- In this case, the user must press and hold the command within

three seconds .

- After approx. 2 seconds the barrier will start to operate in “hold-to-

run” mode, i .e . the pole will continue to move while the command

is activated; THE POLE STOPS AS SOON AS THE COMMAND IS

RELEASED .

If the safety devices are out of service, the automation must

be repaired as soon as possible.

5 -

Even if you possess the skills, never modify the system or pro-

gramming and setting parameters of the automation: this is the

responsibility of the installer .

6 -

Testing, periodic maintenance and any repairs must be docu-

mented by the person performing the operations and the relevant

documents must be kept by the system owner . The only operations

that can be performed by the user periodically are to clean the pho-

tocell lenses and the automation . To prevent anyone from activating

the barrier release the automation system before proceeding with the

operations (as described below) . Use a slightly damp cloth to clean .

7 - Disposal

: At the end of the automation’s lifetime, ensure that it

is disposed by qualified personnel and that the materials are recycled

or scrapped according to current local standards .

9 - Gearmotor manual release and locking

: The gearmotor is

Before using the automation for the first time, ask the installer to explain the origin of residual risks and devote a few minutes to reading this user

instruction and warning manual given to you by the installer . Keep the manual for reference when in doubt and pass it on to new owners of the

automation .

CAUTION! – Your automation is a machine that performs your commands faithfully; negligent or improper use may constitute a

hazard:
– Never activate automation controls if persons, animals or objects are present in the operating range.
– Never touch parts of the automation while the pole is moving!

180°

equipped with a mechanical system that enables manual opening
and closing of the pole . These operations are required in the event of
a power failure or malfunctions .

IMPORTANT!
– The gearmotor release and locking operations must be per-
formed only when the pole is horizontal and stationary.
– The gearmotor can be released manually on both sides of
the barrier.
01.

Unscrew the key cover (

Fig. A - 1

);

02.

Insert the key supplied and turn through 180° (

Fig. A - 2

);

03.

Move the pole as required (

Fig. A - 3

);

04.