Apollo 816 LA Linear Actuator
Installation Reference Manual
13
13
Fig-7A: 816 Existing Connector & Battery Leads
ACTUATOR CONNECTOR
BATTERY LUGS
REMOVE CONNECTOR
1.
Cut off the connector per Fig-7B.
2.
Discard the connector and the red and black battery wires (with lugs).
CUT OFF HERE
8-PIN CONNECTOR
EXISTING SPLICE
SECTION 5: 816 - CONTROLLER WIRING
8 - RED
7 - BLACK
2 - ORANGE
1 - WHITE
6 - N/C
5 - GREEN
4 - RED
3 - BLACK
Fig-7B: Existing Connector & Battery Leads
7
NOTICE
The actuator cable comes with a connector and battery lugs (Fig-7A), which must be cut off before
wiring to the controller.
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]