Nibe S1255-12 Скачать руководство пользователя страница 35

Страница: 35 / 92

Display unit

Status lamp

Display

USB port

On/off button

THE STATUS LAMP

The status lamp indicates current operating status. It:

• lights up white during normal operation.

• lights yellow in emergency mode.

• lights red in the event of a deployed alarm.

• is blue when S1255 is switched off.

• flashes white during active notice.

If the status lamp is red, you receive information and
suggestions for suitable actions on the display.

TIP

You also receive this information via myUplink.

THE USB PORT

Above the display, there is a USB port that can be used
e.g. for updating the software. Visit

myuplink.com

and

click the "Software" tab to download the latest version
of the software for your installation.

TIP

If you connect the product to the network, you
can update the software without using the USB
port. See section "

myUplink

THE ON/OFF BUTTON

The on/off button (SF1) has three functions:

• start

• switch off

• activate emergency mode

To start: press the on/off button once.

To switch off or restart: press the on/off button once.
This brings up a menu with various options.

For hard switch off: press and hold the on/off button for
5 seconds.

You can activate the emergency mode both when S1255
is running and when it is switched off.

To activate when S1255 is running: press and hold the
on/off button (SF1) for 2 seconds and select "emergency
mode" from the shutdown menu.

To activate when S1255 is switched off: press and hold
the on/off button (SF1) for 5 seconds. (Deactivate the
emergency mode by pressing once.)

THE DISPLAY

Instructions, settings and operational information are
shown on the display.

Chapter 8 | Control - Introduction

NIBE S1255

8 Control - Introduction

Содержание S1255-12





























































































Результаты поиска

Содержание S1255-12

Отзывы:

Nibe S1255-12, Руководство по установке, Страница: 35 / 92

Результаты поиска

Содержание S1255-12

Отзывы: