Nibe GV-HR 130, Руководство по установке

Страница: 18 / 40

Fan output
1
GV-HR 130-150
0
0 10 30 20 40 50 60
5
10
15
20
25
30
Effekt
(W)
Flöde
(l/s)
100%
80%
60%
50%
70%
90%
40%
Output
Airflow
Fan output
1
GV-HR 130-250
0
10 0 20 30 40 50 60 70
10
20
30
40
50
60
70
Effekt
(W)
Flöde
(l/s)
30%
100%
80%
60%
50%
70%
40%
Output
Airflow
1 The diagram shows the power consumption per fan.
HUMIDITY
GV-HR 130 has a built-in humidity sensor (BM20) which
is used when you want demand-controlled ventilation.
The speed of the fans is regulated with respect to a set
value depending on the humidity measured in the ex-
haust air as well as the calculated humidity outdoors, to
achieve the desired relative humidity in the home.
The end point for the desired relative humidity in the
home is set in Service menu, menu 32 - "Humidity max
temp" and menu 33 - "Humidity max value".
Set point value, humidity
-10 -5 0 5 10 15 20 25
Utetemperatur
(ºC)
20
30
40
50
60
70
RH
(%)
Relative humidity
Outdoor temperature
End point for factory set values
For more information, see page 28 .
NIBE GV-HR 130 Chapter 6 | Commissioning and adjusting 18