Nibe FIGHTER 1127, Инструкция по установке и обслуживанию

Страница: 4 / 36

General
In order to get the greatest benefit from your heat pump FIGHTER 1127 you should read through the For Home Owners section
in this Installation and Maintenance Instruction.
FIGHTER 1127 a heat pump for heating and cooling of single-family houses. The ground, bedrock or lakes can be used as the
heat source.
FIGHTER 1127 is a Swedish-made quality product offering a long life span and reliable operation.
Completed by the installation engineer when the heat pump is installed
Serial number (95) , should always be stated with all correspondence with NIBE.
_ _ _ _ _ _ _ _ _ _ _ _ _ _
FIGHTER 1127- _ _kW
Installation date
Oil addition
Room control
Accessories:
Electrical addition
Hot water control Other
Installation engineers
Active drilling depth/collector length
Commissioning checks
Temperature brine (flow/return) ____ / ____ Pump setting ___
(Nominal temperature diff 2 –5 °C)
Temperature heat medium (in/out) ____ / ____ Pump setting ___
(Nominal temperature diff 5 –10 °C)
Settings
Basic setting Menu Basic setting Menu
60 10b HP-°min 2 Room *
300 10b Add-min 25 3 Start C
13 11 WW diff HP 20 3 Start H
4 11 Diff AC 53 4a WW-in
20 12 HP-int 44 4a HW start *
50** 12 HWT-stop A 4b HW stop *
65 13 XWW-stop -8 5 Brine in
14 13 XWW-int 9 6a Curveslope H
15 EP-drift ** 2 6a Curveslope C
18 Parallel 15 6b WW-out min
0 19 Cooling 55 6b WW-out max
Date ________ Signed ______________________________
* Accessories ** Electric boiler mode (see menu 15, page 12)
Rights to make any design modifications are reserved.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
FIGHTER 1127 2
For Home Owners
General