Nibe AG-AA10 Series, Руководство по установке

Страница: 6 / 24

Transport
Take care when lifting and moving the indoor and
outdoor unit. We recommend that you ask for assist-
ance and bend your knees when you lift to avoid injur-
ing your back. There is a risk of cutting yourself on the
sharp edges of the climate unit.
Assembly
We recommend that this climate unit be installed by
an authorised technician in accordance with the sup-
plied installation instructions.
NOTE
■
Do not install this climate unit where there
are flue gases, flammable gases or a lot of
moisture, e.g. in a greenhouse.
■
Do not install this climate unit where there
is equipment that generates too much heat.
■ Do not install the unit in premises where it
may be subjected to water splashes (e.g.
laundry rooms).
■
To protect the climate unit from corrosion,
the unit must not be installed where it can
be directly exposed to seawater splashes or
sulphur fumes.
Selection of installation location for outdoor
unit
During installation...
■
...in damp or uneven locations:
Use a base that is stable and raised above the ground
to prevent damage and abnormal vibrations.
■
...in locations exposed to strong winds:
Secure the unit with bolts and metal frame. Ensure
that there is suitable wind protection.
■
...in locations susceptible to snowfall (for climate units
with heat pump):
The concrete foundation or slabs must be positioned
so that the lower edge of the evaporator is at the
level of the average local snow depth, however a
minimum of 300 mm.
Prevent the following:
■
proximity to heat sources or to areas where hot air
is blown out.
■
Installation on wooden wall, because there is a risk
of resonance.
■
damp areas or easily flooded areas and uneven sur-
faces.
■
to drill holes in the areas where there are electrical
parts or units.
The following is recommended:
■
If possible, select well-ventilated, shaded areas.
■
Secure the unit securely at the base to prevent vibra-
tions.
Installation area
Minimum working and maintenance range (measured
in mm):
2000
100 500
2000
400
100
100
400
100
300
100
500
2000 2000
Supplied components
AG-AA10-30/40/50:
1 x Communication cable (8.5 m)
AG-AA10 Chapter 2 | Delivery and handling 4
2 Delivery and handling