Document change log
Updates and changes to the document are listed in this topic.
February 19, 2019
Regarding changes in the backup/restore functionality for Niagara 4.7U1, added a note in the
following topics: “USB Backup and restore feature”, “Restoring from a USB backup” and “Recovering
factory defaults”.
January 23, 2018
Added the procedure, “Resetting platform credentials”. Also, changed the title of another procedure
to, “Recovering factory defaults”.
March 27, 2018
Revised procedure, “Resetting platform credentials”.
December 12, 2016
Minor branding correction in two topics, “Restoring from a USB backup,” and “Restore Options.”
October 11, 2016
Revised wording of the caution included in the following topics: “USB Backup and Restore feature”,
“Create a USB Backup”, “Restoring from a USB Backup”, and “Platform and station backup options”.
September 14, 2016
Minor changes to step 2 of the procedure, “Restoring factory defaults”, to clarify functionality.
August 19, 2016
•
In the topic, “Restoring from a USB Backup”, revised content in steps 5–11.
•
Added a caution to the following topics regarding connecting large-capacity USB drives
(>128GB): “USB Backup and Restore feature”, “Create a USB Backup”, “Restoring from a USB
Backup”, and “Platform and station backup options”.
•
Removed the Caution regarding Sandisk Cruiser USB flash drives causing the unit to fail from
the USB Backup and Restore feature topic.
July 19, 2016
Added a note about supported file systems for USB backup to the topics: “USB backup and restore”,
Creating a USB backup”, and “Platform and station backup options”.
May 6, 2016
Modified note after the first paragraph in chapter 1, included the other features not supported when
running AX.
5
About this Guide
