©
National Instruments Corporation
5
NI SHC68-C68-D5 Cable Installation Instructions
Specifications
Caution
Do not exceed the maximum voltage for your supported NI high-speed DIO device. Refer
to
ni.com/manuals
for the specifications document for your NI high-speed DIO device.
Maximum voltage ..................................................30 VDC CAT I
Maximum current ..................................................300 mA per pin
Weight ....................................................................199 g (7 oz)
Environment
Operating temperature ...........................................0 °C to 55 °C
Storage temperature ...............................................–20 °C to 70 °C
Relative humidity...................................................5% to 85%, noncondensing
Pollution Degree ....................................................2
Maximum altitude..................................................2,000 m
Indoor use only.
3
ch29
32
35
ch30
68
1
ch31
34
52
ctrl0
51
26
ctrl1
9
64
ctrl2
39
30
ctrl3
5
33
ctrl4
2
67
ctrl5
36
8, 60
RESERVED
†
27, 43
2, 4, 6, 10, 12, 14, 16, 18, 20,
22, 24, 28, 32, 34, 36, 38, 40,
42, 44, 46, 48, 50, 54, 56, 58,
62, 66, 68
GND
1, 3, 7, 11, 13, 15, 17, 19, 21,
23, 25, 29, 31, 33, 35, 37, 41,
45, 47, 49, 53, 55, 57, 59, 61,
63, 65, 67
*
Refer to the
NI Switches Help
for a complete listing of channel names and pinouts.
†
RESERVED signal is reserved by the NI 2515 for future use.
Table 1.
Pin Assignment for NI SHC68-C68-D5 Cable* (Continued)
NI SHC68-C68-D5
Connector Pin Number
(Supported NI High-Speed
DIO Device Side)
NI 2515 Signal
NI SHC68-C68-D5
Connector Pin Number
(NI 2515 Side)
