NI PXIe-5840, Руководство по началу работы

Страница: 13 / 20

Performing a Device Self-Calibration Using the NI-
RFSA or NI-RFSG SFP
NI recommends you perform the self-calibration using the NI-RFSA or NI-RFSG Soft Front
Panel (SFP). The NI-RFSA and NI-RFSG SFPs perform the same self-calibration, so it is not
necessary to use both SFPs when you self-calibrate the module.
1.
Launch the NI-RFSA or NI-RFSG Soft Front Panel by navigating to Start » All
Programs » National Instruments »
<Driver>
»
<Driver>
Soft Front Panel .
2. Click Device/System » Calibration » Self Calibration .
3. Click OK to run the self-calibration.
Related Information
Refer to the NI RF Vector Signal Transceivers Help for more information about self-
calibration and self-calibrating in text-based languages.
PXIe-5840 Getting Started Guide | © National Instruments | 13