SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION
PXIe-1092DC
10-Slot 3U PXI Express Chassis
Read this document before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring
instructions in addition to requirements of all applicable codes, laws, and standards. Visit
for more information about your product, including
specifications, pinouts, and instructions for connecting, installing, and configuring your system.
Icons
Refer to the following descriptions if one of these icons is marked on your product or used in this guide.
Notice
Take precautions to avoid data loss, loss of signal integrity, degradation of performance, or damage to the product.
Caution
Take precautions to avoid injury. Consult the product documentation for cautionary statements when you see this icon printed on the
product. Cautionary statements are localized into French for compliance with Canadian requirements.
Caution: Possibility of Electric Shock
Take precautions to avoid electrical shock.
Protective Conductor Terminal (PE)
Indicates a terminal that connects to accessible dead metal parts of the product. Connect the PE terminal(s) to
an earth ground system (protective conductor) for safety.
General Guidelines
Note
Refer to the instrument-level documentation for information about the instruments installed in this product, including proper use, I/O
connections and pinouts. All I/O must be connected per the ratings of the individual components included in the product.
Note
The
Data Record System AD User Manual
contains guidelines and instructions for preparing the vehicle and setting up the product for the first
time.
Note
Only remove panels when qualified personnel perform maintenance and repair procedures.
Note
Disconnect the product from its power source before performing maintenance and repair procedures.
Note
Ensure that maintenance is performed only by qualified personnel. Verify that all equipment is in a safe state after maintenance, prior to
returning the product to operation.
Note
The safety of the product and any equipment integrated into the product is the responsibility of the integrator. Refer to the instrument-level
documentation for cautions and safe use of integrated equipment.
Safety Guidelines
Caution
Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
Suivez toutes les instructions et respectez toutes les mises en garde de la documentation d'utilisation. L'utilisation du produit de toute autre
façon que celle spécifiée risque de l'endommager et de compromettre la protection de sécurité intégrée.
Warning
Risk of Electric Shock: For vehicular or mobile applications where there is no available external protective earthing system, all PXI(e)
modules and any external connections to the chassis are restricted to 30 VAC, 42.4 V
pk
, or 60 VDC maximum.
Mise en garde
Risque de choc électrique: pour les applications mobiles ou en véhicule, lorsqu'aucun système de mise à la terre externe n'est
disponible, tous les modules PXI(e) et toutes les connexions externes au châssis sont limités à 30 V CA, 42,4 V pic ou 60 V CC maximum.
