1-4
|
ni.com
Chapter 1
Getting Started
Figure 1-2.
Rear View of the NI PXIe-1082DC Chassis
Optional Equipment
Contact National Instruments to order the following option for the NI PXIe-1082DC chassis.
Rack Mount Kit
There are two optional kits for mounting the NI PXIe-1082DC chassis into a rack. The first
option is a pair of mounting brackets for use on the front of the chassis. The second option is a
rear rack mount kit. The rear rack mount kit differs from the front kit to allow for easier
installation into the rack. For more information, refer to Figure A-3,
1
Chassis Ground Screw
2
Circuit Breaker Switch
3
Universal DC Input
4
Power Supply Shuttle ID Label
5
Air Filter Retainer Screw
6
Fan Speed Selector Switch
7
Remote Inhibit and Voltage Monitoring Connector
8
Inhibit Mode Selector Switch
9
Power Supply Shuttle Mounting Screws (x8)
10 Power Supply Shuttle Handle (x2)
11 Power Supply Shuttle
12 Air Filter Retainer
13 10 MHz REF IN BNC
14 10 MHz REF OUT BNC
12
1
3
14
8
6
7
3
2
5
4
1
9
10
11
