Appendix A
Specifications
©
National Instruments Corporation
A-5
Note
For the standards applied to assess the EMC of this product, refer to the
Online
Product Certification
section.
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and the
DoC for this product, visit
ni.com/certification
, search by model
number or product line, and click the appropriate link in the Certification
column.
Environmental Management
National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.
For additional environmental information, refer to the
NI and the
Environment
Web page at
ni.com/environment
. This page contains the
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all products
must
be sent to a WEEE
recycling center. For more information about WEEE recycling centers, National
Instruments WEEE initiatives and compliance with WEEE Directive 2002/96/EC on Waste
Electrical and Electronic Equipment, visit
ni.com/environment/weee
.
