Preparing the Environment
Ensure that the environment in which you are using the PXI/PCI-5152 meets the following
specifications.
PXI Modules
Operating Environment
Ambient temperature range
0 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
Maximum altitude
2,000 m (at 25 °C ambient temperature)
Pollution Degree
2
Indoor use only.
PCI Modules
Operating Environment
Ambient temperature range
0 °C to 45 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
Maximum altitude
2,000 m (at 25 °C ambient temperature)
Pollution Degree
2
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
For complete specifications, refer to specifications document for your device at
.
Installing the Software
You must be an Administrator to install NI software on your computer.
1.
Install an ADE, such as LabVIEW or LabWindows
™
/CVI
™
.
2.
Insert the driver software media into your computer. The installer should open
automatically.
4
|
ni.com
|
PXI/PCI-5152 Getting Started Guide
