NI CompactRIO cRIO-9052, Руководство по эксплуатации

Страница: 8 / 19

cRIO-9052 Operating Instructions 8 ni.com
Figure 4. Wiring Power to the cRIO-9052
Wiring the cRIO-9052 for Connectivity to the Host
Connect each of the CAT5 Ethernet cables to the cRIO-9052. Note which
cable is connected to the transmit (Tx) port and which cable is connected
to the receive (Rx) port. You will need this information when you connect
the other end of each of the cables to the appropriate ports on the NI 8310
that is installed in the host system. Refer to the
Install the NI 8310 section
for more information about connecting the CAT5 Ethernet cables to the
host system.
V1
V2
C
C