YingKou NHT Heavy Machinery Co., Ltd
3
2. Operation without the car:
(1) Press “up” to make the lift goes up to middle height around 1200mm.
(2) Press “A”+“1” together to make left platform goes up around 5cm.
(3) Press “A”+“2” together to make the right platform go up to same level as
left platform.
(4) Press “A”+“1” together to make left platform go up around 5cm.
(5) Press “A” +“2” together to make the right platform go up to same level as
left platform.
(6) Press “A” +“3” together to make the left platform go down around 5cm.
(7) Press “A” +“4” together to make the right platform go down to same level
as left platform.
(8) Press “A” +“3” together to make the left platform go down around 5cm.
(9) Press “A” +“4” together to make the right platform go down to same level
as left platform.
(10) Press “up” and “Down” to check if the two platforms are at the same level.
If it is then we can drive car onto it. Otherwise we must repeat steps from (1)
to (10).
Only by this way the lift will works well and no cylinder damage.
If we directly lift car and down without above
adjustment the cylinder will broke!
