NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 96 / 330

4.4 Setting for Main Items
WF1967/WF1968
4-46
4.4.16 To Set Pulse Width and Rising/Falling Time of Pulse Wave
The waveform is assumed to be set as pulse wave [Pulse]. For how to set the waveform,

P.4-15.
The pulse width can be set with either time or duty.
The rising time and the falling time can be set with time only.
a) How To Set Pulse Width time
1.
When the [Width] field is selected and the
ENTER key is pressed, the input field for
pulse width opens.
[Width] is displayed on the first page.
If [Duty] is displayed in the [Width] field,
press the soft-key [Width] while the input
field of the duty is open. It is switched to the
pulse width time display.
2.
Select the digit to be changed by using the right or left arrow key, and then use the up or
down arrow key or the modify knob to increment the value. The change is immediately
reflected to the output.
Or use the numeric keypad to enter the value. Press the ENTER key or the unit key
(soft-key) to set the input value and reflect it to the output. When the ENTER key is pressed,
“s” is set as the unit.
b) How to set pulse width duty
1.
When the [Duty] field is selected and the
ENTER key is pressed, the input field of
pulse width duty opens.
[Duty] is displayed on the first page.
If [Width] is displayed in the [Duty] field,
press the soft-key [Duty] while the duty input
field is open. It is switched to the pulse width
duty display.
2.
Select the digit to be changed by using the right or left arrow key, and then use the up or
down arrow key or the modify knob to increment the value. The change is immediately
reflected to the output.
Or use the numeric keypad to enter the value. Press the ENTER key or the unit key
(soft-key) to set the input value and reflect it to the output. When the ENTER key is
pressed, % is set as the unit.
Pulse width time
input field
Pulse width
Duty input field