NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 70 / 330

4.3 Basic Settings and Operations
WF1967/WF1968
4-20
4.3.6 CH1/CH2 Switching Key and Active Channel (WF1968 Only)
Each time the CH1/CH2 switching key is pressed, the channel to be
set is switched alternately.
This key is disabled on the setting screens that are not dependent on the
channel.
The channel that is to be set is called the "active channel" in this
product. In the burst oscillation and other modes, the TRIG key
works for the channel whose display is active. Active settings are
saved even when moving to setting screens that are not dependent on
the channel.
CH1/CH2
switching key
CH1 active
(CH1 is the Setting target)
CH2 active
(CH2 is the Setting target)
The current active channel is
displayed at the top left corner of
the Oscillator screen