NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 261 / 330

13.4 Operation Sound Setting [Sound]
WF1967/WF1968 13-3
13.4 Operation Sound Setting [Sound]
13.5 Self-Diagnosis [Self Check]
13.6 Product Information Display [Information]
Set whether or not the beep sounds when
performing key operations, modify knob
operation, or an error occurs.
Operation
sound
Self-diagnosis checks the internal status.
Since the check stops the oscillation and
turns off the output, it is recommended to
initialize the setting by [Reset] in advance.
☞
P.4-23
Before check, remove all cables other than
the power cable from this product. In rare
cases, an error may occur due to the effect
of noise.
If you encounter repetitive errors, please
contact NF Corporation or one of our
representatives.
The model name, firmware version, etc. of
this product are displayed.
There are no items to be set.
Model
name
Firmware version
Last calibration or
adjustment date
Self-Diagnosis