NF WAVE FACTORY WF1967, Инструкция по эксплуатации, Страница: 158 / 330

5.1 Procedure to Save Settings
WF1967/WF1968 5-2
You can save the current setting condition in the setting memory, and call it to use later.
Settings are saved on the Store Settings screen and recalled on the Recall Settings screen.
When the power is resumed after a power failure, WF1967 or WF1968 will load the contents of the
configuration memory 1.
☞ P.
4-5
Factory defaults are saved in all the setting memories at factory shipment.
5.1 Procedure to Save Settings
5.1.1 To save to build on memory
1.
When the MENU key is pressed, the top
menu opens. Then, select [Store Settings].
This opens the Store Settings screen.
2.
To save on the unit's internal memory, select
Internal and press the ENTER key.
In the Store Settings screen, select the
[Internal Memory No.] field on the top right of
the screen, and then press the ENTER key to
open the input field of the setting memory
number to be saved.
Use the up/down arrow keys or the modify
knob to increment or decrement the setting
memory number.
In the left side of the screen, the specified
setting memory number and its setting name
are highlighted.
The overview of the setting saved in the
specified setting memory number is
displayed on the right side of the screen.
Select a setting memory number to save, and
then press the ENTER key to close the input
field of the setting memory number.
3.
Press the [Store] soft-key to open the dialog
box to confirm the save operation.
If you wish to save, select [OK], and then
press the ENTER key. The save is made and
the setting previously saved in the setting
memory number is overwritten by the new
setting.
In the top menu,
Select [Store Settings].
Select [Internal Memory No.] on the top right of the
screen, and then press the ENTER key to open the input
field of the setting memory number to be saved.
The overview of the
setting in the specified
setting memory number
is displayed
The specified setting
memory number and
the setting name are
highlighted
Select Internal and press
the ENTER key.
Press the [Store]
soft-key to open the
dialog box to confirm
the save operation.
Select [OK] and then
press the ENTER key
to save.