NF DP060LM, Инструкция по эксплуатации, Страница: 54 / 307

3. Basic Operation
PROGRAMMABLE AC POWER SOURCE 36
  Selection box
If the menu has numbers before its menu items as shown in the screen below (selection box),
pressing the corresponding number on the numeric keypad also selects and runs the item. You can
also move the cursor by using the shuttle.
If you select an item with
on the right, the selection box in the lower hierarchy menu is
displayed. In addition to the ENTER key, you can also use

arrow key to open the selection box of
that menu.
You cannot select grayed items in a selection box, which are different depending on setting.
  Data list box
When selecting data in the memory, the data list box shown in the screen below is displayed. To
select a data in a data list box, hover the cursor over the box by using the arrow keys or jog and press
the ENTER key. This operation enables the cursor to move over each data in the data list box. Hover
the cursor over the item you want to select by pressing the up or down arrow key or turning the jog or
shuttle and press the ENTER key.
3.3.3 Using Soft-keys
When the soft-key function is displayed at the bottom of the LCD screen as shown in the screen on
the next page, pressing a soft-key performs the function assigned to that key.