NF DP060LM, Инструкция по эксплуатации, Страница: 26 / 307

2. Preparation before Use
PROGRAMMABLE AC POWER SOURCE 8
2.1 Check before Use
  Check the safety.
To ensure equipment operator's safety, be sure to read the following sections of the instruction
manual.
 Safety Precautions (Page ii)
 2.4 Grounding and Power Connections
  Check the appearance and contents.
If there is any problem, contact the seller (NF Corporation or our agent) from whom you purchased
this product.
 Appearance check
Make sure that there is no damage or dent made during the transportation on the LCD screen,
keys, jog, or shuttle of the control panel, or rear connectors.
 Contents (main unit and accessories) check
The contents are listed in Table 2-1. Make sure that all of the main unit and accessories are
included.
Table 2-1 List of Content
Content Quantity
Main unit Main unit 1
Accessories
Instruction Manual 1
CD-ROM
Contents: Control Software for DP Series Type L, LabVIEW
Driver, Instruction Manual (Remote Control), Control Software
for DP Series Type L Instruction Manual
1
Control cable
（
D-sub 25 pin connector
）
For device control
1
Stabilizer * (DP120LM only) 1
*
Refer to Figure 2-1 Assembly Diagram of Stabilizer and assemble the stabilizer, because it is
necessary to ensure stability of DP120LM.