NF DP060LM, Инструкция по эксплуатации, Страница: 216 / 307

5. Description of Screen and Menu
PROGRAMMABLE AC POWER SOURCE 198
5.1 Screen Configuration
Figure 5-1 shows the basic screen configuration. It consists of display areas marked as "a" to "i". The
description of each area is shown in Table 5-1.
Figure 5-1 Component Name (Display Areas on the Screen)
Table 5-1 Component Name (Display Areas on the Screen)
Symbol Area name Description Refer
to
a Screen title Title of the currently displayed screen. —
b Output range Current output range. 3.4.3
c Output mode Current output mode. It is displayed in the format of
"AC/DC mode - Signal source." 3.4.2
d Output phase
configuration
Current output phase configuration.
1P2W: Single-phase two-wire/1P3W: Single-phase
three-wire/3P4W: Three-phase four-wire 1.2
e Status icon The area where an icon is displayed when the product
enters the specific state, for example, when the limiter is
activated. 5.1.1
f Measured value
area
The measured values are displayed. In the Simple View,
three items are enlarged. 3.4.11 ,
3.4.12
g Output display
area
The output setting is displayed. Make the output settings
in this area. 3.4
h Soft-key
function
Shows the functions assigned to the soft-keys below. 3.3.3
i Window The window where the confirmation message is
displayed or you change the settings. It is displayed as
needed. 3.3.4
a b c d
e
f
g
h
i