Nexus Cidron Combi Reader, Руководство по установке, Страница: 18 / 32

18
In order to set the reader in programming mode, present the valid
“Authentication Card” to the reader as shown. The reader will beep
and start blinking yellow to indicate that it is now in programming
mode.
The Reader is in programming mode for 10 seconds. If no other
programming card is presented within this time, the reader will
return to normal mode. When a reader leaves programming mode
it is indi cated by a blinking red LED and a beep.
BEEP !
Setting the reader in
programming mode
Reading distance
approximately 2 cm.