Nextar XPJ Скачать руководство пользователя страница 14

Operation 

Start-up 

1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). 

Check that the Power indicator on our projector adapter lights orange after power has been applied. 

2. Plug the DC plug into the projector’s 12VDC socket. Remove the lens cap. If it is left on, it could become 

deformed due to the heat produced by the projection lamp. 

3. Switch on the main power at the left side of the projector. Check that the Power inductor on the projector 

lights green.   

3. Press the Power button on the remote control or projector to start the unit. The Power indicator lights off 

and lights green after 3 seconds when the unit is on. 

4. The start-up procedure takes about 5 seconds after pressing Power, and the image will appear as normal   

(If necessary). Rotate the focus ring to adjust the image clearness.

 

If the projector is still hot from previous activity, it will run the cooling fan for approximately 45 

seconds before energizing the lamp.

 

5. Switch all of the connected equipment on. 

6. You can also press Source on the projector or remote control to select your desired input signal. For more 

information, please refer to 

"Switching input signal" on page 1

4

If the frequency/ resolution of the input signal exceed the projector’s operating range, you will see the 

message “Out Range” displayed on a blue screen.

 

 

Switching input signal 

The projector can be connected to multiple devices at the same time; 

however, it can only display one at a time. To cycle through the available 

input sources, press the Enter button on the projector control panel, or the 

Source button on the remote control. The selected source name will display 

at the Top-Left of the screen for 10 seconds after each button press.   

The brightness level of the projected image will change accordingly 

when you switch between different input signals. Data (graphic) "PC" 

presentations using mostly static images are generally brighter than 

"Video" presentations using mostly moving images (movies). 

The input type affects the options available for the Application Mode. See 

"Selecting an application 

mode" on page 

18

 

for details.

 

 

 

 

 

 

14

Содержание XPJ


























Отзывы: