Next STANTON 133228 Скачать руководство пользователя страница 1

Tools Needed

Helpline

If you have any problems with this product or require 
any replacement fittings please contact Customer 
Services Tel: 0333 777 8999

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to 
be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• Carefully check that you have all parts before beginning assembly.

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

STANTON CORNER DESK  AND SHELF

STANTON CORNER DESK  AND SHELF

STANTON CORNER DESK  AND SHELF

STANTON CORNER DESK  AND SHELF

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 
warping.

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.

• Do not put hot dishes directly on the surfaces of the item.

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

• Never drag pieces of furniture across the floor as this will cause damage to the joints.

• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching 
or damage.

• Do not use furniture polish.

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.

CARE INSTRUCTIONS

• Made in China.

• A minimum of two persons is required to assemble this product.

• Made from honeycomb  board,particle board & MDF with a wood effect finish.

PRODUCT INFORMATION

• We recommend that the packaging is used to protect the surfaces during assembly.

• Keep fittings out of children's reach and keep children well away from the construction area.

• Carefully check that you have all parts before beginning assembly.

Page 1 of 6

Содержание STANTON 133228







Отзывы: