Next HFA112s, Руководство пользователя

Страница: 7 / 11

NEXT
HFA
112s
- User Manual
www.next-proaudio.com
- 4 -
V201609
•
Do not use hardware that isn’t load rated or that its’ rating is not enough to handle the
system’s weight with a good safety factor (minimum 4:1).
•
Suspended systems installation should only be carried out by qualified personnel.
•
Always use adequate protective clothing and equipment to prevent possible injuries.
•
Be sure you understand all local and national regulations regarding equipment
installation.
HFA112s POWER AMPLIFIER
AND DSP
The HFA112s as all HFA series models, was designed
to achieve a simple to use and deploy versatile system.
The amplifier is designed to power not only the
HFA112s itself, but also any passive satellite or group
of satellites, as long as the minimum total impedance
doesn’t reach below 4 Ω . The HFA112s, like all HFA
series models, is prepared to be completely plug’ n
play, having already six pre-determined configurations
that cover almost all situations. But if you’re not happy
with any of those, there are also two available user
defined configurations, which can be used to adapt the
system to your needs using the NEXT-proaudio
SOUNDWARE
1
software and the supplied RS485 to USB
converter.
Here is a brief description of the amplifier panel:
1- Signal Input/Output
2- Level Adjustment Potentiometer
3- Preset Selector
4- RS485 Communication Interface
5- List of Available Presets
6- Satellite Output
7- AC Mains Power Input/Output
8- Protection Circuit Breaker
9- Power On/Off Switch
1
Download NEXT-proaudio SOUNDWARE at www.next-proaudio.com/downloads
1
2
3
4
6
9
5
7
8
Never operate the HFA series Speakers
in a way that maintains the Limiter Led
consistently on.