Tools Needed
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: 0844 844 8999
• A minimum of 2 persons is required to assemble this product.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Carefully check that you have all parts before beginning assembly.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Do not rub or scrub the surface when cleaning.
• Made in China.
• The maximum load this cabinet shelves can hold is 5 kg.
• We would recommend that the following methods to be used to hang the cabinet.
NB - Screws & Raw plugs
for
the wall are not included.
• Made from MDF with painted finish & mirrored glass doors.
• For general cleaning, periodically dust with a soft cloth.
CARE INSTRUCTIONS
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
the glass.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
PRODUCT INFORMATION
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Wall fixings must be used for stability on this item and for safety reason the cabinet should be left freestanding.
• We recommend that the packaging is used to protect the surfaces during assembly.
853213 CRYSTALLE CORNER CABINET
Page 1 of 5