Next 852520 Скачать руководство пользователя страница 1

Tools Needed

Helpline

If you have any problems with this product or require 
any replacement fittings please contact Customer 
Services Tel: 0844 844 8999

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if 
necessary.

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration 
or warping.

• Never drag pieces of furniture across the floor as this will cause damage to the joints.

• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent 
scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.

• Made in China.

• A minimum of  2 persons is required to assemble this product.

• Do not rub or scrub the surface when cleaning.

• For general cleaning, periodically dust with a soft cloth.

PRODUCT INFORMATION

• Made from Pine

 

with NC lacquer finish and painted finish.

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step 
instructions. 

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is partly or fully completed unless the item is 
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.

CARE INSTRUCTIONS

• Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between 
pieces, however this is a natural product, slight colour variations and natural grain markings may occur.

• We recommend that the packaging is used to protect the surfaces during assembly.

• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.

852520 HARTFORD PTD CNRTVUN 

Page 1 of 13

Содержание 852520














Отзывы: