background image

22

www.next-proaudio.com

SERVICE

TROUBLESHOOTING

Simple troubleshooting does not require sophisticated measurement equipment and can be easily undertak-

en by users. The technique should be to segment the system in order to identify the faulty system component. 

A simple sweep with a sine wave generator can be very helpful though it MUST be made at a fairly low level to 

prevent damage to the speakers. A sine wave sweep can help find: 

• 

Vibrations due to loose screws.

• 

Air-leak noises: check that no screws are missing, particularly where the accessories attach to the cabinet.

• 

Vibrations due to a front grille badly positioned on the quick release fixings.

• 

Foreign object that has fallen into the cabinet after repair or through the ports.

• 

Internal connection wires or absorbing material touching the loudspeaker diaphragm

WARRANTY POLICY

NEXT-proaudio’s  products  are  warranted,  by  NEXT-proaudio,  against  manufacturing  defects  in  materials  or 

craftsmanship over a period of 5 years for the passive loudspeakers, and 2 years for all other products counting 

from the date of original purchase. The original receipt of purchase is mandatory for warranty validation 

purposes, and the product must have been bought from a NEXT-proaudio authorized dealer. 

The  warranty  can  be  transferred  to  a  subsequent  owner  during  the  warranty  period;  however,  this  cannot 

extend the warranty period beyond the original warranty period of five years from the original date of 

purchase stated on the NEXT-proaudio’s invoice.

During the warranty period NEXT-proaudio will, at its own discretion, either repair or replace a product which 

prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to an 

authorized NEXT-proaudio service agent or distributor.

NEXT-proaudio cannot be held responsible for defects caused by unauthorized modifications, improper use, 

negligence, exposure to inclement weather conditions, act of God or accident, or any use of this product that 

is not in accordance with the instructions provided by this manual and/or NEXT-proaudio. NEXT-proaudio is 

not liable for consequential damages.

This warranty is exclusive and no other warranty is expressed or implied. This warranty does not affect your 

statutory rights.

END-OF-LIFE

When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is 

not harmful to the environment.

Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local 

authorities for more information.

LA26 Exploded View

Содержание LA26






























Отзывы: