2091 Exchange Court
Fairborn, Ohio 45324
937-426-2703
www.NexSens.com
NexSens mV to RS-485 Signal Adapter
Quick Start Guide
1
The NexSens mV-RS485 signal adapter converts a standard mV output signal to
RS-485, allowing analog sensors to be integrated with an X2-Series data logger.
The adapter is compatible with LI-COR, Turner Designs, and many other voltage
output sensors.
Configure the mV to RS-485 Adapter
Note:
The mV to RS-485 adapter will generally be pre-configured before shipment.
If this is the case, skip to the
Getting Started
section.
1.
Use a UW-USB-485R cable to connect the mV-RS-485 adapter to a PC that
contains the latest iChart software.
2.
From the tool bar at the top, select
Advanced | T-Node FR/mV-RS485
Adapter | Setup…
-Select the
PC COM Port
to which the adapter is connected
-Set the connection type to
Direct to PC
-Enter the
Modbus Address
(If this address is unknown, use the universal
address of 251)
Click
connect,
and
go to the
Configuration
tab
