Nexsan BEAST Series, Руководство пользователя, Страница: 154 / 267

Outbound replication
The Outbound Replication section contains the same information as can be found on the Replication
Information page. See Replication Information on page 87.
Clicking the Next button for a volume that is not yet configured for replication takes you to the Create
Replication - Select Partner page. For instructions on how to set up replication between units, see the Nexsan
High-Density Storage Snapshots and Replication User Guide .
Clicking the Next button for a volume that has replication configured takes you to the Configure Replication
page.
Figure 3-102: Configure Replication page for outbound replication
The Outbound Replication Details section displays the following information:
Table 3-23: Outbound Replication Details
Item Contents
Volume name The user-defined name of the volume.
Array The user-defined name of the array that the volume is on, the controller
which controls that array, and (if the unit has attached expansion units)
the enclosure on which the volume resides.
Capacity Displays the total data storage space of the volume, in terabytes (TB)
and binary gigabytes (GiB).
Current status Displays the current replication status. Possible values are Created ,
Idle , Running , Aborted , and Reference Snapshot is Missing .
Chapter 3: The Graphical User Interface — Configure Volumes
Nexsan High-Density Storage
User Guide
www.nexsan.com
154