Create a Logical Volume
Clicking
Configure Volume
takes you to the
Create a Logical Volume
page, which allows you to create
logical volumes that act like disk partitions on RAID arrays in your system.
Figure 3-86:
Create a Logical Volume
array selection page
Select which RAID array you want to create volumes on by clicking its selection button, then click
Next
to go
to the volume creation tool.
If the selected array has no volumes on it, the volume creation tool looks like this:
Figure 3-87:
Create a Logical Volume
tool page (no volumes in selected array)
Chapter 3: The Graphical User Interface — Configure Volumes
Nexsan High-Density Storage
User Guide
139