Nexsan BEAST BT60 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 57

Nexsan BEAST BT60 Скачать руководство пользователя страница 7

The cordset specification for the Nexsan BEAST in North America is USA IEC C13 to IEC C14, rated
250V/15A. When applying power to the storage system, use ONLY the IEC power cords originally
supplied with it. Do NOT use other power cords, even if they appear identical to the supplied cords.

Only a fully-trained Service Engineer is authorized to disassemble any other part of the storage system,
and then only when the storage system is powered off.

The Nexsan BEAST Storage System has multiple power connections; as a result, you must remove all
power leads to completely remove power from the storage system.

Revision history

This section lists updates and new material added to the

Nexsan BEAST FRU Removal and Replacement

Guide

.

P0450132, Rev. B, March 2022

Updated for technical accuracy, applied new Nexsan template and branding.

P0450132 Rev A, June 2016

Changed to new part numbering system.

NXS-SSBT-MG Rev 02, May 2016

Updated warnings and requirements for 110V operation.

NXS-SSBT-MG Rev 01, November 2015

First release of the

Nexsan Nexsan BEAST FRU Removal and Replacement Guide

.

About this manual

Nexsan BEAST BT60 and BT60X
FRU Removal and Replacement Guide

Nexsan

vii

«
...
5
6
7
8
9
...
»

Содержание BEAST BT60


























































Отзывы:

Нет отзывов