Nexsan BEAST BT60 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 57

Nexsan BEAST BT60 Скачать руководство пользователя страница 6

Contacting Nexsan

For questions about Nexsan products, please visit the

Web page, and the E-Series and

BEAST

Documents and Downloads

page. If you are unable to find the answer to your question there,

please see our contact information below.

Service and support

Nexsan's Technical Services Group provides worldwide assistance with installation, configuration, software
support, warranty, and repair for all Nexsan products. A variety of service and support programs are
available to provide you with the level of coverage and availability your operation requires.

Nexsan Headquarters

1289 Anvilwood Avenue

Sunnyvale, CA 94089

United States of America

Worldwide Web site

E-Series and BEAST support:

https://helper.nexsansupport.com/esr_support

European Head Office, UK

Units 33–35 Parker Centre

Mansfield Road

Derby, DE21 4SZ

United Kingdom

Contact:

https://helper.nexsansupport.com/contact

Related Documents

The following Nexsan product manuals contain related information:

Nexsan BEAST BT60 and BT60X Storage System Installation Guide

Nexsan High-Density Storage User Guide

Nexsan E-Series and BEAST Storage Snapshots and Replication User Guide

Nexsan E-Series and BEAST Multipathing Best Practices Guide

Safety notices

This guide covers the Nexsan BEAST Storage Systems only. Refer to the relevant product manuals for
information on other Nexsan Storage Systems or Storage Expansions and other Nexsan products
mentioned in this guide.

Always observe the following precautions to reduce the risk of injury and equipment damage:

WARNING:

There is a risk of ELECTRIC SHOCK if Nexsan BEAST components are removed or

tampered with when a Nexsan Storage System power is on. Only a trained operator may remove
certain FRUs. The Nexsan BEAST Storage System include the following FRUs:

Power Supply modules

RAID Controller and Expansion modules

Disk drives

Fan modules

The storage system should only be installed in a clean, dry environment. The operating temperature is 5º
to 35º C (41º to 95º F), with operating relative humidity at 20 to 80%, non-condensing.

About this manual

vi

Part Number: P0450132, Rev. B

Nexsan BEAST™ and E-Series™

«
...
4
5
6
7
8
...
»

Содержание BEAST BT60


























































Отзывы:

Нет отзывов