Nexsan BEAST BT60, Руководство по снятию и замене, Страница: 17 / 57

Connectors
Table 1-13: Connectors
Number Component Description
3. Power (2): 100–
240VAC, 47–63Hz.
CAUTION : The cordset specification for the Nexsan BEAST
in North America is IEC C13 to IEC C14 rated 250V/15A.
When applying power to the Nexsan Storage System, use
ONLY the IEC power cords originally supplied with the stor-
age system. Do NOT use other power cords, even if they
appear identical to the supplied cords.
4. Four expansion
ports (
EXP IN 0
and 1
EXP OUT 0 and 1 ) per Expansion Controller: Mini-SAS 26 pin I-Pass
(8088) expansion connectors, each with four 6Gb/s SAS links.
LEDs
Table 1-14: LEDs
Number Component Description
5. PSU status
LED:
Indicates the
status of
power Green indicates that the 12V and 3V3 outputs are within specification. Red
indicates that one or the other, or both, are outside of specified limits.
Orange indicates that the PSU is in standby mode. The
Environmental
Information page (under System Information ) in the graphical user
interface (GUI) has more information. See the Nexsan High-Density
Storage User Guide .
6. PSU fan LED:
Indicates the
status of the
PSU fans Green indicates that all fans are operating within specifications. Red
indicates that one or more fans are either running too slowly or have failed.
When the PSU is in standby mode, this LED is off. The
Environmental
Information page (under System Information ) in the graphical user
interface (GUI) has more information. See the Nexsan High-Density
Storage User Guide .
7. Expansion
port LEDs
(
EXP IN L0
and L1 ,
EXP OUT L0 and L1 ): Indicate the connection status for each expansion
port. Green indicates that the SAS cable is properly connected. Flashing
amber indicates that the cable is improperly connected. If no cable is
connected, this LED is off.
8. Controller
status LED
(
STAT ):
Indicates the status of the Expansion Controller:
Flashing green indicates that the controller is operating within
specifications.
Flashing red indicates that the controller is restarting.
Solid red indicates that there is an issue with the Expansion Controller.
The
Environmental Information page (under System Information ) in
the graphical user interface (GUI) displays details (see the Nexsan
High-Density Storage User Guide ).
Rear panel, BT60X
17 Part Number: P0450132, Rev. B
www.nexsan.com
Nexsan BEAST™ and E-Series™
1